th3 www.vishay.com vishay sprague revision: 27-jun-13 1 document number: 40084 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 solid tantalum surface mount capacitors t antamount ? molded case, high temperature 150 c performance characteristics www.vishay.com/doc?40088 operating temperature: - 55 c to + 150 c capacitance range: 0.33 f to 220 f capacitance tolerance: 10 %, 20 % voltage rating: 6.3 v dc to 50 v dc features ? operating temperature up to 150 c with 50 % voltage derating ? aec-q200 qualified ? 100 % surge current tested ? (b, c, d, e case sizes) ? rohs compliant terminations available: matte tin (all cases), gold (d/e cases) ? standard eia 535baac case size (a through e) ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ? compliant terminations ? moisture sensitivity level 1 note ? * this datasheet provides information about parts that are ? rohs-compliant and/or parts th at are non-rohs-compliant. for ? example, parts with lead (pb) te rminations are not rohs-compliant. ? please see the information/tables in this datasheet for details. applications ? automotive ? industrial ? high temperature sensors notes ? we reserve the right to supply higher volt age ratings and tighter capacitance tolerance capacitors in the same case size. volt age substitutions will be marked wi th the higher voltage rating. (1) contact factory for availability note ? glue pad (non-conductive, part of molded case) is dedicated for glue atta chment (as user option). available available ordering information th3 d 106 k 035 c 0700 type case code capacitance capacitance tolerance dc voltage rating at + 85 c termination and packaging esr see ratings and case codes table. this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. k = 10 % m = 20 % this is expressed in v. to complete the three-digit block, zeros precede the voltage rating. a decimal point is indicated by an r. (6r3 = 6.3 v) a: gold/7" (178 mm) reels (1) b: gold/13" (330 mm) reels (1) c: matte tin/7" (178 mm) reels d: matte tin/13" (330 mm) reels e: tin/lead/7" (178 mm) reels f: tin/lead/13" (330 mm) reels maximum 100 khz esr 0500 = 500 m ? 5000 = 5.0 ? 10r0 = 10.0 ? dimensions in inches [millimeters] case code eia size l w h p t w t h (min.) a 3216-18 0.126 0.008 [3.2 0.20] 0.063 0.008 [1.6 0.20] 0.063 0.008 [1.6 0.20] 0.031 0.012 [0.80 0.30] 0.047 0.004 [1.2 0.10] 0.028 [0.70] b 3528-21 0.138 0.008 [3.5 0.20] 0.110 0.008 [2.8 0.20] 0.075 0.008 [1.9 0.20] 0.031 0.012 [0.80 0.30] 0.087 0.004 [2.2 0.10] 0.028 [0.70] c 6032-28 0.236 0.012 [6.0 0.30] 0.126 0.012 [3.2 0.30] 0.098 0.012 [2.5 0.30] 0.051 0.012 [1.3 0.30] 0.087 0.004 [2.2 0.10] 0.039 [1.0] d 7343-31 0.287 0.012 [7.3 0.30] 0.169 0.012 [4.3 0.30] 0.110 0.012 [2.8 0.30] 0.051 0.012 [1.3 0.30] 0.094 0.004 [2.4 0.10] 0.039 [1.0] e 7343-43 0.287 0.012 [7.3 0.30] 0.169 0.012 [4.3 0.30] 0.157 0.012 [4.0 0.30] 0.051 0.012 [1.3 0.30] 0.094 0.004 [2.4 0.10] 0.039 [1.0] l t h (min.) h w t w p glue pad glue pad
th3 www.vishay.com vishay sprague revision: 27-jun-13 2 document number: 40084 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? esr limits in ? are shown in parenthesis ratings and case codes f 6.3 v 10 v 16 v 20 v 25 v 35 v 50 v 0.33 a (11.0) 0.47 a (14.0) 0.68 1.0 a (6.5) a (5.9) a (3.0, 5.2)/ b (0.5) a (6.6)/b (4.4) c (3.3) 1.5 a (4.3) b (4.2)/c (3.3) 2.2 a (4.6) a (3.4)/b (3.0) a (5.9)/b (3.5) a (5.2)/b (3.0) b (2.5)/c (2.2) 3.3 b (2.7)/c (3.7) b (3.0)/c (2.0) b (2.5, 3.5)/ c (1.7) d (1.7) 4.7 a (2.9)/b (2.7) a (2.9)/b (2.1) a (5.0)/ b (2.9, 1.9)/ c (1.7) a (5.0)/b (2.8)/ c (1.6) b (3.1)/c (1.3)/ d (1.0) c (1.5)/d (0.9) 6.8 a (2.6) a (2.6, 2.0)/ b (1.8)/c (1.7) b (2.4)/c (1.4) c (1.8)/d (0.9) d (0.9) 10 a (3.4, 2.7) a (3.4, 2.0)/ b (1.8)/ c (1.8, 1.7) b (2.0)/c (1.4) c (1.1) c (1.1)/d (0.9) c (1.6)/ d (0.3, 0.7) d (0.8)/e (0.5) 15 b (1.8) a (2.9 ,2.0)/ b (2.0, 1.8, 1.5)/ c (1.8, 1.4) b (2.0)/c (1.0) b (2.0)/c (1.0)/ d (0.9) b (1.4, 2.0)/ c (1.2)/d (0.7) d (0.7) 22 b (2.0, 1.5 ) b (1.5)/ c (1.5, 1.1) b (1.9)/c (1.0)/ d (0.8) c (1.0)/d (0.7) d (0.6) d (0.3, 0.6)/ e (0.5) 33 b (1.9, 1.7) b (1.9, 1.4)/ d (0.8) c (0.9, 0.6)/ d (0.6) d (0.6) d (0.5) 47 b (1.8)/c (0.8) b (1.8)/ c (0.8, 0.5)/ d (0.6) c (0.8, 0.6)/ d (0.6) d (0.7)/e (0.6) e (0.6) 68 b (1.8) c (1.0, 0.8)/ d (1.0, 0.6, 0.4) d (0.6) e (0.6) 100 e (0.3) c (0.9, 0.5)/ d (0.6) d (0.6)/ e (0.6, 0.15) 150 d (0.6) 220 e (0.5) marking a case voltage code volts code 4.0 g 6.3 j 10 a 16 c 20 d 25 e 35 v 50 t marking capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. a case capacitors u se a letter code for the voltage and eia capacitance code. the vishay sprague ? trademark is included if space permits. capacitors rated at 6.3 v are marked 6 v. a manufacturing date code is marked on all capacitors. call the factory for further explanation. capacitance code, pf indicate s high temperature polarity band (+) voltage code v 104h a case date code vi s hay s prague logo indicate s high temperature voltage capacitance, f polarity band (+) 22 h10 xx 2 b, c, d, e case
th3 www.vishay.com vishay sprague revision: 27-jun-13 3 document number: 40084 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c (%) max. esr at + 25 c 100 khz ( ? ) max. ripple 100 khz i rms (a) 6.3 v dc at + 85 c; 4 v dc at + 125 c; 3.15 v dc at + 150 c 10 a th3a106(1)6r3(2)3400 0.6 6 3.40 0.15 10 a th3a106(1)6r3(2)2700 0.6 6 2.70 0.17 15 b th3b156(1)6r3(2)1800 0.9 6 1.80 0.22 22 b th3b226(1)6r3(2)2000 1.3 6 2.00 0.21 22 b th3b226(1)6r3(2)1500 1.3 6 1.50 0.24 33 b th3b336(1)6r3(2)1900 2.0 6 1.90 0.21 33 b th3b336(1)6r3(2)1700 2.0 6 1.70 0.22 47 b th3b476(1)6r3(2)1800 2.8 8 1.80 0.22 47 c th3c476(1)6r3(2)0800 2.8 6 0.80 0.37 68 b th3b686(1)6r3(2)1800 4.1 6 1.80 0.22 100 e th3e107(1)6r3(2)0300 6.0 6 0.30 0.74 10 v dc at + 85 c; 7 v dc at + 125 c; 5 v dc at + 150 c 2.2 a th3a225(1)010(2)4600 0.5 6 4.60 0.13 4.7 a th3a475(1)010(2)2900 0.5 6 2.90 0.16 4.7 b th3b475(1)010(2)2700 0.5 6 2.70 0.18 6.8 a th3a685(1)010(2)2600 6.8 6 2.60 0.17 10 a th3a106(1)010(2)3400 1.0 6 3.40 0.15 10 a th3a106(1)010(2)2000 1.0 6 2.00 0.19 10 b th3b106(1)010(2)1800 1.0 6 1.80 0.22 10 c th3c106(1)010(2)1800 1.0 6 1.80 0.25 10 c th3c106(1)010(2)1700 1.0 6 1.70 0.25 15 a th3a156(1)010(2)2900 1.0 6 2.90 0.16 15 a th3a156(1)010(2)2000 1.0 6 2.00 0.19 15 b th3b156(1)010(2)2000 1.0 6 2.00 0.21 15 b th3b156(1)010(2)1800 1.0 6 1.80 0.22 15 b th3b156(1)010(2)1500 1.0 6 1.50 0.24 15 c th3c156(1)010(2)1800 1.0 6 1.80 0.25 15 c th3c156(1)010(2)1400 1.0 6 1.40 0.28 22 b th3b226(1)010(2)1500 2.2 6 1.50 0.24 22 c th3c226(1)010(2)1500 2.2 6 1.50 0.27 22 c th3c226(1)010(2)1100 2.2 6 1.10 0.32 33 b th3b336(1)010(2)1900 3.3 6 1.90 0.21 33 b th3b336(1)010(2)1400 3.3 6 1.40 0.25 33 d th3d336(1)010(2)0800 3.3 6 0.80 0.43 47 b th3b476(1)010(2)1800 4.7 6 1.80 0.22 47 c th3c476(1)010(2)0800 4.7 6 0.80 0.37 47 c th3c476(1)010(2)0500 4.7 6 0.50 0.47 47 d th3d476(1)010(2)0600 4.7 6 0.60 0.50 68 c th3c686(1)010(2)1000 6.8 8 1.00 0.33 68 c th3c686(1)010(2)0800 6.8 8 0.80 0.37 68 d th3d686(1)010(2)1000 6.8 6 1.00 0.39 68 d th3d686(1)010(2)0600 6.8 6 0.60 0.50 68 d th3d686(1)010(2)0400 6.8 6 0.40 0.61 100 c th3c107(1)010(2)0900 10.0 6 0.90 0.35 100 c th3c107(1)010(2)0500 10.0 6 0.50 0.47 100 d th3d107(1)010(2)0600 10.0 8 0.60 0.50 150 d th3d157(1)010(2)0600 15.0 8 0.60 0.50 220 e th3e227(1)010(2)0500 22.0 8 0.50 0.61 note ? part number definitions: (1) capacitance tolerance: k, m (2) termination and packaging: c, d, e, f (3) termination and packaging: a, b, c, d, e, f
th3 www.vishay.com vishay sprague revision: 27-jun-13 4 document number: 40084 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 16 v dc at + 85 c; 10 v dc at + 125 c; 8 v dc at + 150 c 1.0 a th3a105(1)016(2)6500 0.5 4 6.50 0.11 2.2 a th3a225(1)016(2)4300 0.5 6 4.30 0.13 3.3 a th3a335(1)016(2)3400 0.5 6 3.40 0.15 3.3 b th3b335(1)016(2)3000 0.5 6 3.00 0.17 4.7 a th3a475(1)016(2)2900 0.8 6 2.90 0.16 4.7 b th3b475(1)016(2)2100 0.8 6 2.10 0.2 6.8 a th3a685(1)016(2)2600 1.1 6 2.60 0.17 6.8 a th3a685(1)016(2)2000 1.1 6 2.00 0.19 6.8 b th3b685(1)016(2)1800 1.1 6 1.80 0.22 6.8 c th3c685(1)016(2)1700 1.1 6 1.70 0.25 10 b th3b106(1)016(2)2000 1.6 6 2.00 0.21 10 c th3c106(1)016(2)1400 1.6 6 1.40 0.28 15 b th3b156(1)016(2)2000 2.4 6 2.00 0.21 15 c th3c156(1)016(2)1000 2.4 6 1.00 0.33 22 b th3b226(1)016(2)1900 3.5 6 1.90 0.21 22 c th3c226(1)016(2)1000 3.5 6 1.00 0.33 22 d th3d226(1)016(3)0800 3.5 6 0.80 0.43 33 c th3c336(1)016(2)0900 5.3 6 0.90 0.35 33 c th3c336(1)016(2)0600 5.3 6 0.60 0.43 33 d th3d336(1)016(3)0600 5.3 6 0.60 0.50 47 c th3c476(1)016(2)0800 7.5 6 0.80 0.37 47 c th3c476(1)016(2)0600 7.5 6 0.60 0.43 47 d th3d476(1)016(3)0600 7.5 6 0.60 0.43 68 d th3d686(1)016(3)0600 10.9 6 0.60 0.50 100 d th3d107(1)016(3)0600 16.0 8 0.60 0.50 100 e th3e107(1)016(3)0600 16.0 8 0.60 0.56 100 e th3e107(1)016(3)0150 16.0 8 0.15 1.11 20 v dc at + 85 c; 13 v dc at + 125 c; 10 v dc at + 150 c 1.0 a th3a105(1)020(2)5900 0.5 4 5.90 0.11 2.2 a th3a225(1)020(2)5900 0.5 6 5.90 0.11 2.2 b th3b225(1)020(2)3500 0.5 6 3.50 0.16 3.3 b th3b335(1)020(2)2700 0.7 6 2.70 0.18 3.3 c th3c335(1)020(2)2700 0.7 6 2.70 0.20 4.7 a th3a475(1)020(2)5000 0.9 6 5.00 0.12 4.7 b th3b475(1)020(2)1900 0.9 6 2.90 0.17 4.7 b th3b475(1)020(2)2900 0.9 6 1.90 0.21 4.7 c th3c475(1)020(2)1700 0.9 6 1.70 0.25 10 c th3c106(1)020(2)1100 2.0 6 1.10 0.32 15 b th3b156(1)020(2)2000 3.0 6 2.00 0.21 15 c th3c156(1)020(2)1000 3.0 6 1.00 0.33 15 d th3d156(1)020(2)0900 3.0 6 0.90 0.41 22 c th3c226(1)020(2)1000 4.4 6 1.00 0.33 22 d th3d226(1)020(2)0700 4.4 6 0.70 0.46 33 d th3d336(1)020(2)0600 6.6 6 0.60 0.5 47 d th3d476(1)020(2)0700 9.4 6 0.70 0.46 47 e th3e476(1)020(2)0600 9.4 8 0.60 0.56 68 e th3e686(1)020(2)0600 13.6 8 0.60 0.56 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c (%) max. esr at + 25 c 100 khz ( ? ) max. ripple 100 khz i rms (a) note ? part number definitions: (1) capacitance tolerance: k, m (2) termination and packaging: c, d, e, f (3) termination and packaging: a, b, c, d, e, f
th3 www.vishay.com vishay sprague revision: 27-jun-13 5 document number: 40084 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 25 v dc at + 85 c; 17 v dc at + 125 c; 12.5 v dc at + 150 c 0.47 a th3a474(1)025(2)14r0 0.5 4 14.00 0.073 1.0 a th3a105(1)025(2)5200 0.5 4 5.20 0.12 1.0 a th3a105(1)025(2)3000 0.5 4 3.00 0.16 1.0 b th3b105(1)025(2)5000 0.5 4 5.00 0.13 2.2 a th3a225(1)025(2)5200 0.6 6 5.20 0.12 2.2 b th3b225(1)025(2)3000 0.6 6 3.00 0.17 3.3 b th3b335(1)025(2)3000 0.8 6 3.00 0.17 3.3 c th3c335(1)025(2)2000 0.8 6 2.00 0.23 4.7 a th3a475(1)025(2)5000 1.2 6 5.00 0.12 4.7 b th3b475(1)025(2)2800 1.2 6 2.80 0.17 4.7 c th3c475(1)025(2)1600 1.2 6 1.60 0.26 6.8 b th3b685(1)025(2)2400 1.7 6 2.40 0.19 6.8 c th3c685(1)025(2)1400 1.7 6 1.40 0.28 10 c th3c106(1)025(2)1100 2.5 6 1.10 0.32 10 d th3d106(1)025(2)0900 2.5 6 0.90 0.41 15 b th3b156(1)025(2)2000 3.8 6 2.00 0.21 15 b th3b156(1)025(2)1400 3.8 6 1.40 0.25 15 c th3c156(1)025(2)1200 3.8 6 1.20 0.30 15 d th3d156(1)025(2)0700 3.8 6 0.70 0.46 22 d th3d226(1)025(2)0600 5.5 6 0.60 0.50 33 d th3d336(1)025(2)0500 8.3 6 0.50 0.55 47 e th3e476(1)025(2)0600 11.8 6 0.60 0.56 35 v dc at + 85 c; 23 v dc at + 125 c; 17.5 v dc at + 150 c 0.33 a th3a334(1)035(2)11r0 0.5 4 11.00 0.08 1.0 a th3a105(1)035(2)6600 0.5 4 6.60 0.11 1.0 b th3b105(1)035(2)4400 0.5 4 4.40 0.14 1.5 b th3b155(1)035(2)4200 0.5 6 4.20 0.14 1.5 c th3c155(1)035(2)3300 0.5 6 3.30 0.18 2.2 b th3b225(1)035(2)2500 0.8 6 2.50 0.18 2.2 c th3c225(1)035(2)2200 0.8 6 2.20 0.22 3.3 b th3b335(1)035(2)3500 1.2 6 3.50 0.16 3.3 b th3b335(1)035(2)2500 1.2 6 2.50 0.18 3.3 c th3c335(1)035(2)1700 1.2 6 1.70 0.25 4.7 b th3b475(1)035(2)3100 1.7 6 3.10 0.17 4.7 c th3c475(1)035(2)1300 1.6 6 1.30 0.29 4.7 d th3d475(1)035(2)1000 1.6 6 1.00 0.39 6.8 c th3c685(1)035(2)1800 2.4 6 1.80 0.25 6.8 d th3d685(1)035(2)0900 2.4 6 0.90 0.41 10 c th3c106(1)035(2)1600 3.5 6 1.60 0.26 10 d th3d106(1)035(2)0700 3.5 6 0.70 0.46 10 d th3d106(1)035(2)0300 3.5 6 0.30 0.71 15 d th3d156(1)035(2)0700 5.3 6 0.70 0.46 22 d th3d226(1)035(2)0600 7.7 6 0.60 0.50 22 d th3d226(1)035(2)0300 7.7 6 0.30 0.71 22 e th3e226(1)035(2)0500 7.7 6 0.50 0.61 50 v dc at + 85 c; 33 v dc at + 125 c; 25 v dc at + 150 c 1.0 c th3c105(1)050(2)3300 0.5 4 3.30 0.18 3.3 d th3d335(1)050(2)1700 1.7 6 1.70 0.30 4.7 c th3c475(1)050(2)1500 2.4 6 1.50 0.27 4.7 d th3d475(1)050(2)0900 2.4 6 0.90 0.41 6.8 d th3d685(1)050(2)0900 3.4 6 0.90 0.41 10 d th3d106(1)050(2)0800 5.0 6 0.80 0.43 10 e th3e106(1)050(2)0500 5.0 6 0.50 0.61 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c (%) max. esr at + 25 c 100 khz ( ? ) max. ripple 100 khz i rms (a) note ? part number definitions: (1) capacitance tolerance: k, m (2) termination and packaging: c, d, e, f (3) termination and packaging: a, b, c, d, e, f
th3 www.vishay.com vishay sprague revision: 27-jun-13 6 document number: 40084 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? at + 25 c , the leakage current shall not exceed the value listed in the standard ratings table. at + 85 c , the leakage current shall not exceed 10 times the value listed in the standard ratings table. at + 125 c , the leakage current shall not exceed 12 times th e value listed in the standard ratings table. at + 150 c , the leakage current shall not exceed 15 times th e value listed in the standard ratings table. typical leakage current factor recommended voltage de rating guidelines (for temperatures below + 85 c) standard conditions. for example: output filters capacitor voltage rating operating voltage 6.3 3.6 10 6.0 16 10 20 12 25 15 35 24 50 28 severe conditions. for example: input filters capacitor voltage rating operating voltage 6.3 3.3 10 5.0 16 8.0 20 10 25 12 35 15 50 24 leakage current factor percent of rated voltage 100 10 1.0 0.1 0.01 0.001 + 125 c + 85 c + 55 c + 25 c - 55 c + 150 c 0 c 0 10 20 30 40 50 60 70 80 90 100
th3 www.vishay.com vishay sprague revision: 27-jun-13 7 document number: 40084 for technical questions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 power dissipation case code maximum permissible power diss ipation at + 25 c (w) in free air a 0.075 b 0.085 c 0.110 d 0.150 e 0.165 standard packaging quantity case code units per reel 7" reel 13" reel a 2000 9000 b 2000 8000 c 500 3000 d 500 2500 e 400 1500 product information guide for molded ta ntalum capacitors www.vishay.com/doc?40074 pad dimensions package dimensions moisture sensitivity www.vishay.com/doc?40135 selector guides solid tantalum selector guide www.vishay.com/doc?49053 solid tantalum chip capacitors www.vishay.com/doc?40091 faq frequently asked questions www.vishay.com/doc?40110
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
